Baltimore, MD

Insect Incubators Baltimore, MD

Insect Incubators in Baltimore, MD. Whatever field of research you're in that requires an insect incubator, you need precision, accuracy, dependability, and efficiency. For over 20 years Darwin Chambers has been the number one choice for the design and manufacture of reach-in chambers and controlled environment rooms for countless applications in Baltimore, MD. We have 3 series of insect incubators, and each one is versatile enough to be ideal for use in the breeding, rearing, incubating, and observation of drosophila, mosquitoes, and other insects. As our headquarters are in the middle of the country, we are able to install and repair insect incubators in Baltimore, MD and anywhere in North America. Reach out to Darwin Chambers today at 877-783-6774 or complete our online questionnaire for a free quote.

Our insect incubators have been used and appreciated in countless uses in Baltimore, MD, such as:

Darwin Chambers' Insect Incubators in Baltimore, MD


Reach-in Insect Incubators

Our IN model of insect rearing chambers is preferred among Baltimore, MD drosophila and mosquito researchers, however they have also been useful to researchers in other fields. With more than one thermoelectric colling device, they allow both sufficient capacity and a failsafe in case one of the units fails. Unlike other incubators, corrosion is not a problem, and most repairs are able to be done with simple hand tools. Setpoints can be set with minimal instruction, and they come with a high-temperature cut-off switch to protect insects.

We have units small enough to fit under a counter, and larger, multi-door insect incubators. Upon request, we can also include:

  • Chart recorder
  • Timed lighting
  • CO2
  • Data loggers
  • Dryers
  • Ultrasonic humidification
  • Glass doors on the IN030, IN034, IN055, and IN084

Low Temp Insect Incubators

Our INR line of low temp insect incubators can also be used for a variety of applications and include both heating and cooling capabilities from 2°C to 50°C, making them great for Baltimore, MD locations where outside heat may be otherwise prohibitive. We have similarly sized models as the IN series.

Insect Incubator Rooms

We also design, manufacture, and install insect rearing controlled environment rooms for larger applications in Baltimore, MD. Each room is custom-made, however if you need a quicker solution you can also take advantage of our Quick-Ship Program. Some of the features of our insect incubator rooms are:

  • Accessibility — We make all of our controlled environment rooms with ADA regulations in mind.
  • Security — All units come with a glow in the dark, antimicrobial pull cord as a personnel emergency alarm.
  • Efficiency ̵ Our Precision Fluid Temperature Control Unit is an indirect cooling system that utilizes a combination of refrigeration technologies which places less of a burden on energy loads. LED lights emit more light per unit of energy while not interfering with the temperature controls as much as fluorescent bulbs.
  • Durability — We use materials like an epoxy coating to ensure that the parts are protected against corrosion and last as long as possible, and all of our rooms come with a variety of services to properly maintain them and make sure they stay in peak condition.

Whichever classification of insect you are studying and rearing, and whatever your capacity needs in Baltimore, MD, Darwin Chambers' insect incubators can provide the precise temperature and humidity controls and can be as small or large as you need in order to do your best work. For more information on our specific models, please click on the individual models at the bottom of the page.

What Makes Darwin Chambers' Insect Incubators the Best Choice for Your Baltimore, MD Research

In addition to our state-of-the-art systems, there are many you should choose our insect incubators for your Baltimore, MD needs. When you order any insect incubator from Darwin, you'll also get:

  • 24-hour technical support as long as your incubator lasts
  • Standard warranties
  • Extended warranties for cooling components, parts, and labor
  • Quiet operation so you can have a more productive workspace
  • Stainless steel surfaces for for the most hygienic unit possible
  • Antimicrobial handles to reduce the spread of bacteria and pathogens
  • Optional virtual touchscreens so data is easily logged, stored, and accessed
  • Non-proprietary, globally recognized Fuji Electric controllers with autotuning, fuzzy logic, programmable alarms, offset capability and more (if you prefer another controller, we can install that too)
  • Unrivaled uniformity through thermoelectric cooling
  • Greatly decreased direct and indirect energy loads which will reduce your energy bills and allows for our insect incubators to be located in spaces unsuitable for other incubators
  • "Future proof" cooling systems that are set up to stay compliant with federal regulations in the refrigerant industry even as they begin to allow for fewer refrigerants
  • Financing options to help your company maintain working capital while conducting your research

Call Darwin Chambers today to learn more about what makes us the number one choice among insect incubators supplier for Baltimore, MD scientists in a variety of fields.

See what other services we offer our Baltimore, MD clients:

Baltimore, MD Insect Incubators | Darwin Chambers

You need to know that your insect incubators in Baltimore, MD are reliably built and give reliable data. That's why we are not just content to be leaders in the insect incubator manufacturing industry, but endeavor to constantly challenge ourselves and seek out new ways to produce even more reliable chambers and rooms. If your Baltimore, MD facility is in need of insect incubators, call Darwin Chambers today at 877-783-6774 or fill out our online form for a free quote.

INO11

INO11

The IN011 is a bench top insect rearing chamber designed to fit on 24” benchtops or stacked with optional racking.

IN03

IN03

The IN03 is an undercounter insect rearing chamber.

IN030

IN030

The IN030 is a single-door insect rearing chamber.

IN034

IN034

The IN034 is an extra wide single-door insect rearing chamber.

IN055

IN055

The IN055 is a 2-door insect rearing chamber.

IN084

IN084

The IN084 is a 3-door insect rearing chamber.

INR011

INR011

The INR011 is a bench top incubator designed to fit on 24” benchtops or stacked with optional racking.

INR030

INR030

The INR030 is a single-door incubator.

INR034

INR034

The INR034 is a single-door incubator providing extra cubic feet designed for maximum capacity while still allowing passage through most commercial …

INR055

INR055

The INR055 is a two-door incubator.

INR084

INR084

The INR084 is a three-door incubator.

Insect Rearing Rooms

Insect Rearing Rooms

Our insect rearing incubators offer reliable, efficient environmental controls for a variety of applications, including: microbiology, life science, …

Other Locations We Service

Schema