Insect Rearing Low Temp Chamber- INR011

The INR series chambers are popular among researchers and are used for a variety of applications. The INR series laboratory incubators include heating and cooling capabilities. These units have lower temperature specifications than our thermoelectrically cooled units, have associated greater heat removal capabilities, and are ideal for locations where the ambient conditions cannot be controlled very well. The INR series incubators use compressor technology and have temperature ranges of 2°C to 50°C.


Share this Product


INR Series Overview

The INR series chambers are designed with insect rearing as the primary application, but can be used for other research studies well. Our INR series chambers are widely used among insect researchers and offer state of the art technology for pursuing various research studies.


The INR011 is a bench top incubator designed to it on 24” benchtops or stacked with optional racking.

Additional information

Cabinet Construction

Standard model features powder-coated galvanized steel door, front, and sides. Interior has 304 stainless steel on door liner, top, bottom, back and sides.
2" I.D access port with access port cover and insulation plug located on side wall of the chamber.


Racking available to stack units.


Positive magnetic seal, reversible.


Entire cabinet structure and doors insulated using 2" urethane foam.


2 stainless steel shelves are standard. Shelves capable of supporting up to 150 lbs of evenly distributed weight.
Full height shelf support pilasters, with double oblong holes on 1" centers. Pilasters made of stainless steel. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Refrigeration System

Unsurpassed temperature control through continuous refrigeration bypass system.
Refrigeration system factory balanced using CFC free 134A refrigerant.
Top mounted condensing unit.
Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain interior cabinet temperature (non-adjustable capillary tube system superior to problematic expansion valve).
Evaporator – epoxy coated at the time of manufacture to eliminate the potential of corrosion.

Electrical Characteristics

Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet.
A cord and plug set is included.
A sole use circuit is recommended.