DB034

The DB034 is a single-door incubator providing extra cubic feet designed for maximum capacity while still allowing passage through most commercial doorways.

SKU# DB034

Share this Product

About

About

The DB030 is a single-door reach-in incubator providing extra cubic feet designed for maximum capacity while still allowing passage through most commercial doorways.

The DB series incubators include heating capabilities and cooling capabilities. These units excel as general all-around incubators. They have lower temperature specifications than our thermoelectrically cooled units and have associated greater heat removal capabilities. These units are ideal for locations where the ambient conditions cannot be controlled very well or there is a live heat load - such as for HPLCs, shakers, or other laboratory equipment. These units will also outperform our thermoelectric units where specifications call for
fast “open door” recovery times.

Control System

All DB series models come standard with a Fuji PXF4 (PID - Fuzzy Logic) controller providing a readout of actual and set-point values. This chamber comes with audible and visual alarms, ramp/soak, remote monitoring and a numeric password protection. Plenty of alternative customized options are available.

Options

All DB series offer endless customized options. Common upgrades include more stainless steel shelving, stainless steel exterior, various lighting options including LED, fluorescent, dimming options and microprocessor control of lights, upgraded controllers (West EC-44, Future Design Touchpad, Watlow, Allen Bradley, etc.), and more.

Services and Warranties

Darwin Chambers Company offers 24 hour technical support throughout the lifetime of your chamber. In addition to standard warranties, we also offer extended warranties for cooling components, parts and labor. We also provide qualifications, validations and preventive maintenance services at an additional
cost. Please ask for a quote.

Product Specs

Additional information

Cabinet Construction

Standard model features powder-coated door, front, and sides. Interior has 304 stainless steel on door liner, top, bottom, back and sides. Exterior is galvanized heavy-duty steel or aluminum construction for long term corrosion free appearance. Changes to color possible with optional upgrade. Heavy-duty casters included as standard.
Optional model availability to change construction materials to aluminum or higher end grades of stainless steel available.
2" I.D access port with access port cover and insulation plug located on side wall of the chamber.

Doors

Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,"Low-E" glass.

Insulation

Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Refrigeration System

Unsurpassed temperature control through continuous refrigeration bypass system.
Refrigeration system factory balanced using CFC free 134A refrigerant.
Top mounted condensing unit.
Factory pre-engineered capillary tube system with over-sized condenser and evaporator to reduce product pull down time and to consistently maintain interior cabinet temperature (non-adjustable capillary tube system superior to problematic expansion valve).
Evaporator – epoxy-coated at the time of manufacture to eliminate the potential of corrosion.

Electrical Characteristics

Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 6RLA under test conditions.
A cord and plug set is included.
A sole use circuit is recommended.