Cabinet Construction Standard model features stainless door, front, and brushed aluminum sides. Interior has coated aluminum side walls, door liner, and back with stainless steel floor and ceiling. 2" I.D access port with access port cover and insulation plug located on side wall of the chamber. Doors Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,"Low-E" glass. Insulation Entire cabinet structure and doors insulated using foamed-in-place CFC-free polyurethane foam. Shelving Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 150 lbs. Gray PVC coated shelves are standard. Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf. Downloads Download Specification Refrigeration System Refrigeration system factory balanced using CFC free 404A refrigerant. Top mounted condensing unit. Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain interior cabinet temperature (non-adjustable capillary tube system superior to problematic expansion valve). Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion. Electrical Characteristics Unit completely pre-wired at factory, and ready for final connection to a 208-230/60/1 phase - 15 amp dedicated (recommended) outlet. Unit runs approx. 10 RLA under test conditions. A cord and plug set is included. A sole use circuit is recommended. Popular options include chart recorder and TraceLock electronic/audit capable locks.