Laboratory Incubators TE Series

The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability. Common uses of the TE series include microbiological and BOD studies, among numerous other applications.


TE011

TE011

The TE011 is a benchtop incubator.

TE03

TE03

The TE03 model is an under-counter lab incubator.

TE030

TE030

The TE030 is one of our single-door upright lab incubators.

TE034

TE034

The TE034 is another upright, single-door lab incubator providing extra cubic feet designed for maximum capacity while still allowing passage throug …

TE055

TE055

The TE055 is a 2-door incubator model.

TE084

TE084

The TE084 is a 3-door lab incubator.

TE Series Features

The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability, which makes them ideal microbiological incubators, BOD incubators or general laboratory incubators.

Simple Serviceability

Due to the omission of all refrigeration equipment on these models, refrigeration technicians are not required during incubator servicing. Refrigerated incubators are not only costly to service, but can require days to service properly. Nearly every component of thermoelectric-based chambers can be serviced within minutes with basic tools.

Widely Proven, Non-Proprietary Controllers

Standard controllers for the TE Series are manufactured by Fuji Electric and are ideal for laboratory incubators. Unlike many proprietary controllers, this controller is commercially available and proven in tens of thousands of installations. Standard functions include: autotuning, fuzzy logic, PID control, programmable alarms, calibration capability, ramp/soak, offset capability, etc. A touchscreen control interface is optional. Other controller manufacturers are also supported (Watlow, Allen-Bradley etc.)

Service and Warranties

Darwin Chambers Company offers 24 hour technical support throughout the lifetime of your chamber. In addition to standard warranties, we also offer extended warranties for cooling components, parts and labor. We also provide qualifications, validations and preventive maintenance services at an additional cost. Please ask for a quote.

Options

  • Chart Recorders
  • Data Loggers
  • Dryers
  • Full swinging interior glass door (034)

Reliable Cooling Redundancy

Each TE series incubators includes multiple, independent thermoelectric cooling units. The 7 year warranty on cooling components and the ability of our chambers to maintain temperature, even if the chamber suffers multiple failures, is unmatched by any other refrigeration-based chamber.

Superior Control and Uniformity

Thermoelectric cooling and automatic switching system from cooling to heating control provide consistent results throughout the available temperature range. Standard control at the sensor in these chambers is ±0.2°C.

Greatly Reduced Direct and Indirect Energy Loads

The TE Series incubators utilize less energy than comparable incubators and introduce less impact upon building cooling systems. This efficiency “dual benefit” allows our chambers to be located in spaces unsuitable for other chambers.

Quiet Operation

The TE series incubators utilize quiet, highly efficient DC fans.

Schema