TE084

The TE055 is a three-door reach-in laboratory incubator. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability. Read about the benefits below.

Reliable Cooling Redundancy

Each TE series incubators includes multiple, independent thermoelectric cooling units. The 7 year warranty on cooling components and the ability of our chambers to maintain temperature, even if the chamber suffers multiple failures, is unmatched by any other refrigeration-based chamber.

Quiet Operation

The TE series incubators utilize quiet, highly efficient DC fans.

Simple Serviceability

Due to the omission of all refrigeration equipment on these models, refrigeration technicians are not required during incubator servicing. Refrigerated incubators are not only costly to service, but can require days to service properly. Nearly every component of thermoelectric-based chambers can be serviced within minutes with basic tools.

Superior Control and Uniformity

Thermoelectric cooling and automatic switching system from cooling to heating control provide consistent results throughout the available temperature range. Standard control at the sensor in these chambers is ±0.2°C.

Options Available

• Chart Recorders
• Data Loggers
• Bench-Top Chamber Capable of Being Stacked
• Dryers

Greatly Reduced Direct and Indirect Energy Loads

The TE Series incubators utilize less energy than comparable incubators and introduce less impact upon building cooling systems. This efficiency “dual benefit” allows our chambers to be located in spaces unsuitable for other chambers.

Widely Proven, Non-Proprietary Controllers

Standard controllers for the TE Series are manufactured by Fuji Electric and are ideal for laboratory incubators. Unlike many proprietary controllers, this controller is commercially available and proven in tens of thousands of installations. Standard functions include: autotuning, fuzzy logic, PID control, programmable alarms, calibration capability, ramp/soak, offset capability, etc. A touchscreen control interface is optional. Other controller manufacturers are also supported (Watlow, Allen-Bradley etc.)

Services and Warranties

We offer 24 hour technical support throughout the lifetime of your incubator. In addition to standard warranties, we also offer extended warranties for cooling components, parts and labor. We also provide qualifications, validations and preventive maintenance services at an additional cost. Please ask for a quote.