TE011

The TE011 is a bench top lab incubator designed to it on 24” benchtops or stacked with optional racking.

SKU# TE011

Share this Product

About

The TE011 is a single-door, benchtop laboratory incubator and part of our TE series of lab incubators.

Reliable Cooling Redundancy

Each TE series incubators includes multiple, independent thermoelectric cooling units. The 7 year warranty on cooling components and the ability of our chambers to maintain temperature, even if the chamber suffers multiple failures, is unmatched by any other refrigeration-based chamber.

Quiet Operation

The TE series incubators utilize quiet, highly efficient DC fans.

Simple Serviceability

Due to the omission of all refrigeration equipment on these models, refrigeration technicians are not required during incubator servicing. Refrigerated incubators are not only costly to service, but can require days to service properly. Nearly every component of thermoelectric-based chambers can be serviced within minutes with basic tools.

Superior Control and Uniformity

Thermoelectric cooling and automatic switching system from cooling to heating control provide consistent results throughout the available temperature range. Standard control at the sensor in these chambers is ±0.2°C.

Options Available

  • Chart Recorders
  • Data Loggers
  • Bench-Top Chamber Capable of Being Stacked
  • Dryers

Greatly Reduced Direct and Indirect Energy Loads

The TE Series incubators utilize less energy than comparable incubators and introduce less impact upon building cooling systems. This efficiency “dual benefit” allows our chambers to be located in spaces unsuitable for other chambers.

Widely Proven, Non-Proprietary Controllers

Standard controllers for the TE Series are manufactured by Fuji Electric and are ideal for laboratory incubators. Unlike many proprietary controllers, this controller is commercially available and proven in tens of thousands of installations. Standard functions include: autotuning, fuzzy logic, PID control, programmable alarms, calibration capability, ramp/soak, offset capability, etc. A touchscreen control interface is optional. Other controller manufacturers are also supported (Watlow, Allen-Bradley etc.)

Services and Warranties

We offer 24 hour technical support throughout the lifetime of your incubator. In addition to standard warranties, we also offer extended warranties for cooling components, parts and labor. We also provide qualifications, validations and preventive maintenance services at an additional cost. Please ask for a quote.

Additional information

Cabinet Construction

Standard model features powder-coated door, front, and sides. Interior has 304 stainless steel on door liner, top, bottom, back and sides.
2" I.D access port with access port cover and insulation plug located on side wall of the chamber.

Racking

Racking available to to stack units.

Doors

Positive magnetic seal. Reversible.

Insulation

Entire cabinet structure and doors insulated using 2" urethane foam.

Shelving

2 stainless steel shelves are standard.Shelves capable to supporting up to 150 lbs of evenly distributed weight.
Full height shelf support pilasters, with double oblong holes on 1" centers. Pilasters made of stainless steel. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Cooling System

Top mounted, thermoelectric cooling system.
Peltier based technology is solid state, highly efficient, reliable.
Semi-Redundant cooling capability.

Electrical Characteristics

Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet.
A cord and plug set is included.
A sole use circuit is recommended.

Features

This unit employs our thermolelctric cooling system with heat for unsurpassed temperature uniformity and control with minimal vibration. The cooling components are warranted for 7 years. This size is designed to fit on most laboratory benches. This unit uses roughly half the electricity of our compressor driven models and roughly 1/4 the electricity of some of our competitor's models.

OVERSTOCK ON PASS THRU REFRIGERATOR, HUGE SALE!!!!

Schema