Insect Rearing Low Temp Chamber- INR084

The INR series chambers are popular among researchers and are used for a variety of applications. The INR series laboratory incubators include heating and cooling capabilities. These units have lower temperature specifications than our thermoelectrically cooled units, have associated greater heat removal capabilities, and are ideal for locations where the ambient conditions cannot be controlled very well. The INR series incubators use compressor technology and have temperature ranges of 2°C to 50°C.

SKU# INR084

Share this Product

About

About

INR Series Overview

The INR series chambers are designed with insect rearing as the primary application, but can be used for other research studies well. Our INR series chambers are widely used among insect researchers and offer state of the art technology for pursuing various research studies.

INR084

The INR084 is a 3-door incubator.

Product Specs

Additional information

Cabinet Construction

Stainless model has stainless steel front doors and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes interior lighting.
Standard model features stainless door, front, and brushed aluminum sides. Interior has aluminum side walls, door liner, and back with stainless steel floor and ceiling.
2" I.D access port with access port cover and insulation plug located on side wall of the chamber.

Doors

Lifetime guaranteed adjustable torsion type closure system with aluminum and stainless supports. The face of each fitted with a 12" long recessed handle with sheet metal interlock. Handles foamed in place to insure permanent attachment. Door gasket of one piece construction. Glass door models feature double pane, "Low-E" glass. Barrel lock standard for each door. Locks keyed alike.

Lighting

LED interior lighting as standard on stainless model, optional on standard model. Lights activated by rocker switch mounted above doors.

Insulation

Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

Shelving

Wire shelves (3 per door) available in stainless steel, chrome plate, or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. PVC coated shelves are standard.
Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Refrigeration System

Unsurpassed temperature control through continuous refrigeration bypass system.
Refrigeration system factory balanced using CFC free 134A refrigerant.
Top mounted condensing unit.
Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain interior cabinet temperature (non-adjustable capillary tube system superior to problematic expansion valve).
Evaporator – epoxy coated at the time of manufacture to eliminate the potential of corrosion.

Electrical Characteristics

Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 8RLA under test conditions.
A cord and plug set is included.
A sole use circuit is recommended.