Insect Rearing Low Temp Chamber- INR034

The INR series chambers are popular among researchers and are used for a variety of applications. The INR series laboratory incubators include heating and cooling capabilities. These units have lower temperature specifications than our thermoelectrically cooled units, have associated greater heat removal capabilities, and are ideal for locations where the ambient conditions cannot be controlled very well. The INR series incubators use compressor technology and have temperature ranges of 2°C to 50°C.

SKU# INR034

Share this Product

About

About

INR Series Overview

The INR series chambers are designed with insect rearing as the primary application, but can be used for other research studies well. Our INR series chambers are widely used among insect researchers and offer state of the art technology for pursuing various research studies.

INR034

The INR034 is a single-door incubator designed for maximum capacity while still allowing passage through most commercial doorways.

Product Specs

Additional information

Cabinet Construction

Standard model features powder-coated door, front, and sides. Interior has 304 stainless steel on door liner, top, bottom, back and sides. Exterior is galvanized heavy-duty steel or aluminum construction for long term corrosion free appearance. Changes to color possible with optional upgrade. Heavy-duty casters included as standard.
Optional model availability to change construction materials to aluminum or higher end grades of stainless steel available.
2" I.D access port with access port cover and insulation plug located on side wall of the chamber.

Doors

Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,"Low-E" glass.

Insulation

Entire cabinet structure and doors insulated using foamed-in-place CFC-free polyurethane foam.

Shelving

Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Refrigeration System

Unsurpassed temperature control through continuous refrigeration bypass system.
Refrigeration system factory balanced using CFC free 134A refrigerant.
Top mounted condensing unit.
Factory pre-engineered capillary tube system with over-sized condenser and evaporator to reduce product pull down time and to consistently maintain interior cabinet temperature (non-adjustable capillary tube system superior to problematic expansion valve).
Evaporator – epoxy-coated at the time of manufacture to eliminate the potential of corrosion.

Electrical Characteristics

Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 6RLA under test conditions.
A cord and plug set is included.
A sole use circuit is recommended.