HT055

The HT055 is a two-door reach-in chamber model and a part of our HT line of heated incubator/oven chambers.

SKU# HT055

Share this Product

About

The HT055 is Darwin Chambers' heated oven/incubator chamber model with two doors.

The HT series was introduced in 2003 as the first commercially manufactured large capacity heated incubator. The HT series incubators are presently in use by research companies around the world. The advantages of these incubators are listed below.

Why Choose the HT Series Incubator/Oven

This superior heated incubator/oven does not employ cooling to maintain temperature. Without cooling components, the HT series is the most efficient and reliable series we sell.

Superior Efficiency

The unit uses roughly 1/4 the electricity of our compressor driven models and roughly 1/8 the electricity of some of our competitor's models.

Options Available

  • Chart Recorders
  • Data Loggers

Widely Proven, Non-Proprietary Controllers

Standard controllers for the HT series are manufactured by Fuji Electric and are ideal for heated incubators. Unlike many proprietary controllers, this controller is commercially available and proven in tens of thousands of installations. Standard functions include: autotuning, fuzzy logic, PID control, programmable alarms, calibration capability, ramp/soak, offset capability, etc. A
touchscreen control interface is optional. Other controller manufacturers are also supported (Watlow, Allen Bradley etc.)

Services and Warranties

We offer 24 hour technical support throughout the lifetime of your chamber. In addition to our standard warranties, we also offer extended warranties for cooling components, parts and labor. We also provide qualifications, validations and preventive maintenance services at an additional cost. Please ask for a quote.

Additional information

Cabinet Construction

Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
Standard model features stainless door, front, and brushed aluminum sides. Interior has coated aluminum side walls, door liner, and back with stainless steel floor and ceiling.
2" I.D access port with access port cover and insulation plug located on side wall of the chamber.

Doors

Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,"Low-E" glass.

Insulation

Entire cabinet structure and doors insulated using foamed-in-place CFC-free polyurethane foam.

Shelving

Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Features

HT series incubators/ovens do not employ cooling to maintain temperature. Without cooling components, the HT series is the most efficient and reliable units we sell. This unit uses roughly 1/4 the electricity of our compressor driven models and roughly 1/8 the electricity of some of our competitor's models.
This size is designed to fit through most commercial doorways, or smaller doorways by tilting.
Due to the lack of refrigeration components, this is a very quiet incubator.

Electrical Characteristics

Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 6RLA under test conditions.
A cord and plug set is included.
A sole use circuit is recommended.

Schema