DR09

The DR09 is a heated, dry incubator chamber and is designed for benchtop use.

SKU# DR09

View Product Spec Sheet

Share this Product

About

About

Specifications

Temperature Range: 40°C to 150°C
Control of temperature at sensor: ±5°C
Temperature sensor accuracy: ±0.2°C
Humidity Range: = or < then 5% RH throughout the temperature range
Custom Plenum
Vaisala RH sensor
Custom heat distribution system
Membrane dehumidifier

Temperature control and uniformity specifications assume standard operation in a controlled ambient condition of 72°F ±8°F and a dewpoint at or below 52°F (72°F/50% RH).

Product Specs

Additional information

Racking

Racking available to stack units.

Doors

Positive magnetic seal, reversible.

Insulation

Entire cabinet structure and doors insulated using 2" urethane foam.

Shelving

2 stainless steel wire shelves included. Shelves capable of supporting up to 150 lbs of evenly distributed weight.
Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of stainless steel. Four, stainless steel shelf clips to be included for each shelf.

Features

The DR series boasts an efficient heat distribution system to provide optimal performance. Heated air is engineered to flow in an umbrella pattern, ensuring increased uniformity. Chamber is equipped with automatic high temperature cut-off to protect contents and user, and an easily serviceable heater and fan unit. This unit uses roughly 1/8 the electricity of some of our competitor's models.

Electrical Characteristics

Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Chambers equipped with 9ft cord with NEMA 5-15P plug.
A sole use circuit is recommended.