Darwin Chambers

New Jersey, NJ

Insect Rearing New Jersey, NJ - Insect Rearing Chambers and Incubators in New Jersey, NJ

New Jersey, NJ Insect Rearing

We have invested our time and talents in designing the best incubators and chambers to provide the best possible atmosphere for studying drosophila (fruit flies), mosquitos, and other insects. Insect rearing chambers are made to breed, rear, incubate, and observe insects and other specimens you are studying in New Jersey, NJ. As well, the precise temperature control and quality construction equip insect rearing chambers for use in many additional applications beyond the study of insects in New Jersey, NJ.

Darwin Chambers has been known for the precise temperature controls and consistent environmental conditions – such as temperature, humidity, and light – of our chambers. We have engineered our insect rearing product lines accounting for certain considerations for which more general chambers do not account.

Due to our in-depth knowledge of the needs involved in insect research, our engineers have been able to conceive insect rearing systems that manifest:

  • Ease of cleaning
  • Ability to shut down all heat-producing and cold-producing equipment in emergency situations
  • Decontamination abilities
  • Nearly silent noise levels
  • Easy programming
  • resistance to corrosion

Darwin’s Insect Rearing Chamber Features

For insect rearing rooms and containers, the cooling system is one of the major issues. Darwin Chambers’ thermoelectric cooling provides reliable cooling, sturdy construction, and is energy efficient, as it does not need to cycle or run at full capacity unlike other cooling mechanisms that are commonly used in refrigerating systems. The one limitation of thermoelectric cooling is the temperature range to which the system can cool. Multiple, independently running thermoelectric units provide redundancy and the guarantee of consistent temperature. This design allows our chambers to maintain temperature even in the event of multiple system failures.

Most researchers have no call for an insect rearing environment below 15 degrees Celsius. For situations that necessitate lower temperature capabilities, our low-temperature insect rearing chambers have a powerful, epoxy-coated condenser refrigeration system with a range of 2 to 50 degrees Celcius.

A thick layer of sealed aluminum separates each chamber’s cooling device from the chamber interior. This layer protects against the highly acidic substances that are often a part of New Jersey, NJ insect rearing, sometimes as their form of food. High acidity is highly corrosive to some materials, but epoxy coating and thick stainless steel protect your insect rearing chamber from damage.

The standard controls on our machines are made by Fuji Electric and are ideal for insect rearing chambers. The Fuji PxF4 PID Fuzzy Logic controller is found in numerous of commercial products with a proven record in performance and reliablity.

Our insect rearing products come standard with many additional features that put our chambers ahead of our competitors. Primarily, our chambers are built using durable materials such as stainless steel wire shelving options and corrosion-resistant walls. In addition, enjoy the use of magnetic seal doors, a diurnal ramping and soaking cycle, and setpoints and high/low alarms that are simple to set with very little instruction required.

Types of Insect Rearing Products

The Darwin Chambers team has engineered a diverse range of New Jersey, NJ insect rearing products , each designed for the specific needs of an entomologist or any researcher who studies insect subjects. Our insect rearing products are categorized as reach-in chambers, walk-in rooms, and low-temperature reach-in chambers. If you’re not sure which model is right for you, speak with one of our friendly expert associates.

Reach-In Insect Chambers – the IN series

The IN series is credited as the premier commercially manufactured large capacity thermoelectric-cooled insect rearing chamber, thousands of which are currently being used by researchers worldwide. The models range in size from benchtop to three-door full length.

Due to the omission of traditional refrigeration technologies, these machines do not require expensive refrigeration servicing. Our reach-in chambers are are easy to service quickly and with minimal effort due to the simplicity of the components involved. Installation in New Jersey, NJ is a breeze.

Walk-In Insect Chambers

Our walk-in chambers are available in whatever custom dimensions and specifications necessary for use within your New Jersey, NJ facility. In addition to the list of standard features that are included in all of our insect-rearing chambers, regardless of their size, there are other features to consider when discussing our insect rearing rooms.

Because our walk-in rooms are, as the name implies, meant for the users to walk into, we have made sure to provide ADA compliant features that make the room accessible to everyone. Epoxy coated air handlers make parts resistant to corrosion over time. All exposed surfaces are coated with a finish to protect against corrosion.

Because of the large scale of walk-in rooms, energy efficiency becomes a priority and presents a challenge. Precision Fluid Temperature Control Unit, or PFTCU, is an indirect cooling system that makes use of multiple refrigeration technologies. It leads competing technology in affordability and efficiency. In addition, LED lights within the chamber provide more light while emitting less heat, and require less energy than fluorescent bulbs.

When people will be entering the chamber, safety is the top priority. Our New Jersey, NJ insect rearing rooms always include safety features like an emergency alarm. Personnel emergency alarms feature an illuminated push-button inside the room with glow-in-the-dark labels and a pull cord. The emergency system is easy to access and engage and is also easy to reset. When triggered, visual and audible alarms will sound – a feature that can halt emergency situations before they become even more dangerous.

Low-Temperature Insect Rearing Chambers – INR Series

Low-temperature insect rearing chambers reach lower temperatures than our other models and have advanced heat removal abilities. These models are appropriate for use in environments where ambient conditions are extreme or difficult to control or when there is a live heat load. Research that necessitates rapid open door recovery times is best done using a low temp chamber.

Order New Jersey, NJ Insect Rearing Equipment Now | Darwin Chambers

Darwin Chambers has led the way in the insect rearing chamber industry for the nearly twenty years we have been in operation. As a researcher, you understand that you must always be able to rely on the performance of your equipment, that your tools must be of the best quality. Contact Darwin Chambers or view our online catalog to order the perfect insect rearing environment for your New Jersey, NJ research needs.