Heated Humidified Incubator – HH030

Heated Humidified Incubator – HH030

Cabinet Construction
  • Stainless model has stainless steel front door, and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
  • Standard model features stainless door, front, and brushed aluminum sides. Interior has coated aluminum side walls, door liner,and back with stainless steel floor and ceiling.
Doors
  • Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,”Low-E” glass.
Insulation
  • Entire cabinet structure and doors insulated using foamed-in-place CFC-free polyurethane foam.
Shelving
  • Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 150 lbs of evenly distributed weight. Gray PVC coated shelves are standard.
  • Full height shelf support pilasters, with double oblong holes on 1″ centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
Benefits to the HH030
  • HH series incubators do not employ cooling to maintain temperature. Without cooling components, the HH series is the most efficient and reliable units we sell. This unit uses roughly 1/4 the electricity of our compressor driven models and roughly 1/8 the electricity of some of our competitor’s models.
  • This size is designed to fit through most commercial doorways, or smaller doorways by tilting.
  • Due to the lack of refrigeration components, this is a very quiet incubator.
Electrical Characteristics
  • Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase – 15 amp dedicated (recommended) outlet. Unit runs approx. 6RLA under test conditions.
  • A cord and plug set is included.
  • A sole use circuit is recommended.

Popular options include chart recorder and TraceLock electronic/audit capable locks.

Features

Why Choose The HH Series Incubator

The HH series was introduced in 2003 as the first commercially manufactured large capacity heated and humidified incubator. The HH series incubators are presently in use by research companies around the world.
This superior heated and humidified incubator comes equipped with our exclusive ultrasonic humidification system to generate a cool mist that eliminates hot spots within your chamber, normally associated with steam-based humidification. In addition, when utilized with water that meets out recommended standards, the ultrasonic humidification system greatly reduces required operational and maintenance costs as compared to traditional steam based humidification systems.

Superior Control and Uniformity

The ultrasonic humidification system provides excellent humidity control and avoids hot spots seen during chamber mapping of steam boiler equipped chambers. Standard control at the sensor in these chambers is ±0.2°C and ±0.3%RH.

Widely Proven, Non-Proprietary Controllers

Standard controllers for the AR Series are manufactured by Fuji Electric and are ideal for archival storage chambers Unlike many proprietary controllers, this controller is commercially available and proven in tens of thousands of installations. Standard functions include: autotuning, fuzzy logic, PID control, programmable alarms, calibration capability, offset capability, etc. A touchscreen control interface is optional. Other controller manufacturers are also supported (Watlow, Allen Bradley etc.)

Services and Warranties

We offer technical support throughout the lifetime of your chamber. In addition to standard warranties, we also offer extended warranties for cooling components, parts and labor. We also provide qualifications, validations and preventive maintenance services at an additional cost. Please ask for a quote.

Options Available

  • Chart Recorders
  • Data Loggers
  • Dryers
  • Bench-Top Chamber Capable of Being Stacked