CABINET CONSTRUCTION: • 300 series stainless steel front grill, shroud and doors. Anodized quality aluminum exterior ends and back. • Interior – INSF approved, white vinyl coated aluminum and 300 series stainless floor with coved corners. • Barrel lock standard for each door. Locks keyed alike. • Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection. • Frame rail fitted with 4" diameter casters, (front casters include brakes). DOORS: • 300 series stainless steel exterior with white aluminum interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.
• Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 12" long recessed handle with sheet metal interlock. Handles are foamed-in-place to insure permanent attachment. INSULATION: • Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam. SHELVING: • Adjustable vinyl coated wire shelves (3 per door). Shelves capable of supporting up to 250 lbs. • Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf. LIGHTING: • Incandescent interior lighting. Light(s) activated by rocker switch mounted above door(s). Timed lighting available. COOLING SYSTEM: • Top mounted, thermoelectric cooling system. • Peltier based technology is solid state, highly efficient, reliable. • Semi-Redundant cooling capability. • Cooling surfaces act as dehumidifying modules at 25°C/60%RH and above. ELECTRICAL CHARACTERISTICS: • Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set to be included. • A sole use circuit is required. | 
