IN055 Insect Rearing Chamber

humidity and temperature control on KB series environmental chamberCall for pricing 314-534-3111

CABINET CONSTRUCTION:
• Stainless model has stainless steel front doors and sides on exterior. Interior is stainless steel side walls, back, floor, ceiling, and door liner. This unit includes LED interior lighting.
• Standard model (pictured at right with optional humidification and optional chart recorder) features stainless door, front, and brushed aluminum sides. Interior has aluminum side walls (looks like stainless steel), door liner,and back with stainless steel floor and ceiling.

DOORS:
• Positive seal, self-closing doors (gravity cam-lift) with 120 degree stay open feature. Door gasket removal and installation is tool-less. Glass door models feature double pane,"Low-E" glass.

INSULATION:
• Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.

SHELVING:
• Wire shelves (3 per door) available in stainless steel or PVC coated. Shelves capable of supporting up to 200 lbs. Gray PVC coated shelves are standard.
• Full height shelf support pilasters, with double oblong holes on 1" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

Standard Specs  
Temperature Range 20°C to 60°C
Temperature Control +0.2°C
Temperature Uniformity +0.7°C
Ambient Temp. Recommendation 21°+3°C
Control Sensitivity 0.1°C
Control Readout Actual and Set-Point Values
Sensor NIST-Traceable Platinum RTD
Controller Microprocessor based PID
Calibration Capability Yes, actual and set values
Alarm Audible and visible
Alarm Type Deviation in 0.1°C
Remote Monitoring Available
Electrical 115v, 60 Hz, 6 RLA
Interior Cubic Feet 49 net
Required Clearance 1" all sides
Number of Shelves 6
Cord Length 7'
Crated Weight 780 lb

REFRIGERATION SYSTEM:
• Top mounted, thermoelectric cooling system. Peltier based technology is solid state, highly efficient, reliable, and provides minimal vibration.
• Semi-Redundant cooling capability.
• Cooling surfaces act as dehumidifying modules at 25°C/60%RH and 30°C/65%RH

ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 15 amp dedicated (recommended) outlet. Unit runs approx. 6RLA under test conditions.• A cord and plug set is included.
• A sole use circuit is recommended.

 

Popular options include humidity control, glass door, chart recorder, timed lighting, and TraceLock electronic/audit capable locks.

KB030 Environmental Chamber