CABINET CONSTRUCTION: • 300 series stainless steel front grill, shroud and doors. 300 series stainless steel exterior ends, top, back, and bottom. • Interior – 300 series stainless steel interior cabinet side walls, back, door liner, and floor with coved corners. Construction of liner in accordance with NSF standards • Barrel lock standard for each door. Locks keyed alike. • Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection. • Frame rail fitted with 4" diameter casters, (front casters include brakes). DOORS: • 300 series stainless steel exterior with 300 series stainless steel interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction. • Lifetime guaranteed adjustable torsion type closure system with aluminum and stainless steel supports. The face of each door fitted with a 12" long recessed handle with sheet metal interlock. Handles are foamed-in-place to insure permanent attachment. INSULATION: • Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam. SHELVING: • Adjustable wire shelves (3 per door). • Shelves capable of supporting up to 250 lbs. LIGHTING: • Incandescent interior lighting. Light(s) activated by rocker switch mounted above door(s). ELECTRICAL CHARACTERISTICS: • Unit completely pre-wired at factory, and ready for final connection to a 115/60/1 phase - 20 amp dedicated outlet. A cord and plug set to be included. • A sole use circuit is required. | 
